Description

About this item

 

• Support up to HD TVI video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When TVI signal input, the tester will display HD TVI camera image.
• Portable multi-functions CCTV tester with 5 inch TFT-LCD Screen(Not touch screen), 800*480 resolution, make your job more easily with this professional CCTV tester.
• The CCTV tester built in 18650 2600mA battery, after charging 3-4 hours, working time lasts 11 hours, long standby time. Small body, portable and easier to carry.
• This camera tester also features a multi-purpose testing unit that includes built-in PTZ tester/controller, UTP cable test, audio surveillance test, and power output.
• Support VGA/HDMI 1.1 Compliant Digital input, can be used for debugging DVR/NVR recorder, also can be a display.
• Note: This is CCTV camera tester (NOT Support IP PoE Camera). The battery is protected by a film, please remove the film to use this teste
• If you have any questions about the product, you can contact our after-sales team.

   

Troubleshoots

 

• IP camera can not be tested.

  This tester not supports any IP cameras testing, it can only be used to test analog cameras.  

• The tester can not produce pictures.

  When the device is switched to CVI mode, only connected to CVI camera can it produce pictures. If the camera is other TVI / AHD signal camera, the mode should be switched to TVI / AHD signal correspondingly, so that the connected camera can produce pictures but not flicker.  

• Must this be plugged in, in order to turn on or does the batteries need to be charged?

  This tester is built-in battery, as long as the battery power is sufficient, you can turn it on normally, if not, that means that the battery power has been consumed, you need charge it, fully charge it and then you can unplug the power supply to use.  

• HDMI isn’t recognized.

  If HDMI is used as the display input, it can only be connected to the NVR or DVR which with an input signal of HDMI. If HDMI is a signal output, it needs to be connected to the display or TV.    

5 Inch CCTV Tester

 

Features

Audio testing: Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable. UTP cable test: Display UTP cable connection status, cable type and the sequence of wires as well as read the number of the test box. VGA/HDMI input: Support VGA/HDMI 1.1 Compliant Digital input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode.  

PTZ Controller

  Support RS485, compatible with protocols PELCO-D/P, you can control the ratation of PTZ, up or down, left or right, and you also can adjust zoom, focus, aperture size.      

Rechargeable

  Power the camera with DC 12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available. Built-in 18650 2600mA battery, after charging 3-4 hours, working time lasts 11 hours.  

Video Signal Testing

  Video monitor tester, high-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal.